business hours
- Monday - Friday: 9am - 6pm
- Saturday: By prior appointment only
- Sunday: Closed
Workshop
from £25 per cylinder
£25 per cylinder for inline car and commercial engine blocks, (all cylinders bored sequentially then honed after)
NOTE: If the engine requires more than 2 cuts per bore then an additional charge of £5 per cut will be added per cylinder.
-------------------------------------------------------------------
£30 per cylinder for single and multi cylinder industrial engines where the cylinders are not part of the crankcase, and all motorcycle engines (each cylinder jig bored and honed separately)
NOTE: If the engine requires more than 2 cuts per bore then an additional charge of £5 per cut will be added per cylinder.
NOTE: If the engine requires more than 2 cuts per bore then an additional charge of £5 per cut will be added per cylinder.
-------------------------------------------------------------------
£30 per cylinder for single and multi cylinder industrial engines where the cylinders are not part of the crankcase, and all motorcycle engines (each cylinder jig bored and honed separately)
NOTE: If the engine requires more than 2 cuts per bore then an additional charge of £5 per cut will be added per cylinder.
On Site
From £30 per cylinder
£30 per cylinder for inline car and commercial engine blocks, (all cylinders bored sequentially then honed after).
NOTE: If the engine requires more than 2 cuts per bore then an additional charge of £5 per cut will be added per cylinder.
-------------------------------------------------------------------
£35 per cylinder for single and multi cylinder industrial engines where the cylinders are not part of the crankcase , and all motorcycle engines (each cylinder jig bored and honed separately)
NOTE: There will be a 50p per mile one way charge from my home in Borehamwood to customer's premises.
NOTE: If the engine requires more than 2 cuts per bore then an additional charge of £5 per cut will be added per cylinder.
-------------------------------------------------------------------
£35 per cylinder for single and multi cylinder industrial engines where the cylinders are not part of the crankcase , and all motorcycle engines (each cylinder jig bored and honed separately)
NOTE: There will be a 50p per mile one way charge from my home in Borehamwood to customer's premises.
in situ
from £35 per cylinder
£35 per cylinder for inline car and commercial engine blocks, (all cylinders bored sequentially then honed after)
NOTE: If the engine requires more than 2 cuts per bore then an additional charge of £5 per cut will be added per cylinder.
-------------------------------------------------------------------
NOTE: There will be a 50p per mile one way charge from my home in Borehamwood to customer's premises.
NOTE: If the engine requires more than 2 cuts per bore then an additional charge of £5 per cut will be added per cylinder.
-------------------------------------------------------------------
NOTE: There will be a 50p per mile one way charge from my home in Borehamwood to customer's premises.
Concerning VAT: There is NO VAT to add to the above prices, as I am NOT VAT registered, the price you see is the price you pay.
Contact me
